LG G3 WIFI fix




I am sad because my LG G3 wifi is not working. So I have to repair it myself.


At first, the motherboard was disassembled and heated with the dryer. It worked well, but WIFI soon died.

So the second time I put a piece of silicone rubber between the main board and the back case. This worked well for a few days, but eventually WIFI died.
these two methods were not solutions.





So I have new LG G3 WIFI repair method.


1. Disconnect the  motherboard from the  LG G3




<Silicone rubber insert (elasticity + heat resistance)>

2. Insert three pieces of silicone rubber between the G3 liquid crystal display and the G3 motherboard.



 <Insert motherboard>
<In this state, press the power button>

3. Insert the battery, attach the back case to the main board, and turn on the power.

                                                                        <power on>
<Remove Case again>
4. Place the back case back on the desk and expose the motherboard.

<push main board>
<WIFI Search  "ON">
5. Turn on the WIFI in the WIFI setting on the  LG G3 screen.
6. Press firmly on both sides of main board and check if WIFI works on the screen.

<The gap between the main board and the case is wide by silicone rubber>
7. Close the  LG G3 case if the Wi-Fi is on and Wi-Fi Active


< Fill the gap with Cut plastic pieces.>
8. Fill the gap with plastic pieces.



9. Tighten the screws from the outside of the case. However, it is recommended not to insert screws in the middle part(because WIFI is now work insert screws in the middle part)


10. Tighten the screws one by one to check if WIFI operation is working.


<END>

good luck.

Comments